Best glue to stick N gauge figures onto a layout

[JustinSmith]

Apologies if this has been asked before on here, my excuse is that Google didn't seem to find it if it has.
What is the best glue to stick N Gauge figures onto a layout ?
I have tried UHU and super glue, but with both the figures frequently topple over before the glue sets and it's very frustrating !
Basically it's onto painted surfaces mainly, possibly also onto plastic.

[crewearpley40]

A dab of blue tac / blacktack / tacky wax
Makes removing figures easier.

Less messier than copydex. I prefer using a cocktail stick to place a bit of superglue

Chris

[Nbodger]

I have always used superglue, holding the figures with tweezers for a few seconds to allow the adhesive to grab.

[ntpntpntp]

Depends how permanently you want to secure them?

Traditionally I used to use PVA, but since I've been using static grass I've found the base layer glue for that works well for figures as it dries more quickly with a slightly rubbery result.

I do use superglue on occasion but it's not my favourite as it can fail over time.

For more temporary positioning the Copydex or Tacky-wax.

[Bigmac]

i use PVA for most things now.  Just let it go off for a few mins before sticking your figures down.  Its very forgiving if you get it wrong at first. Dries clear.

[JustinSmith]

Thanks you all for your advice.
I have just been experimenting with wood glue / PVA, leaving it 5 min to become tacky before placing the figures on the layout. That seemed to work reasonably well. Certainly, for me, better than UHU or superglue !

[joe cassidy]

Don't forget double-sided sticky tape

[honestjudge]

I use Deluxe 'Glue and Glaze' which is a PVA type glue, but gets tacky much quicker than the usual PVA glues.

[martyn]

If you use superglue, try the gel version; it is more tacky than the thin type when drying, giving a bit more grab whilst drying.

Martyn

[Richard @ N'Tastic Scale Models]

The key for a quick set is superglue and moisture, so small drop of glue where you want the figure to go and a bit of water on the part of figure to be glued down. Super glue likes moist surfaces hence why it sticks your fingers together so much better than the kit. So a drop of water on the back of your hand will do the trick. Spot of glue, dip the figure into water on your hand and into the glue hold for a few seconds should be good to go. You can use this trick during assembly of kits but you lose time to make adjustments.

[PLD]

In a lot of cases, no matter what the glue or the subject, the missing magic ingredient is a bit of patience... 

[beauharlan]

Stand Tall and Fearless in the Boldly Designed LionKingShirt

A great graphic tee speaks volumes. It establishes your personal style, makes a statement, and provokes meaningful dialogue. From fit checks to short styling tips and care instructions, you'll actually follow, this guide walks you through dressing a fantastic shirt in a few simple steps. You'll discover what makes a shirt unique, how to dress it, and how to keep the graphic looking fresh. With a powerful, straight-cut shape that enables you to stride forth with grace and confidence, the name LionKingShirt is fitting.

1. Who Is This Shirt For?

You want your wardrobe to reflect who you are. Bold prints—not gaudy ones—and a T-shirt that can be worn to work, a night out, and all points in between are what you need. You've come to the perfect spot if you enjoy simple designs, clean lines, and icons. Fans of Lion King T-shirts understand the allure: a personal vibe, a distinctive style, and a significant symbol. Noise is secondary to intention. Always.

1.1 Inpiduals Who Value Expression Over Clothing

• Intention, not clutter, is what you adore.
• It has to pass the '9 a.m. meeting, 9 p.m. music' test.
• Those who want a simple wardrobe: many options, one essential.

1.2 Minimalism Never Goes Out Of Style

A striking statement is followed by the necessities: straight-leg jeans, shoes, and a low-profile cap. Use neutral layers to make the design stand out.



Street-style T-shirt with bold prints and a confident vibe

2. When And Where Is The Best Time To Wear It?

Everything is altered by context. Under a silk-blend bomber, the T-shirt stands out in a stand-up set with a creative edge. Wear it with boots and cargo pants at a street fair. It breaks the ice in a café. Want to capture the vibe of the Lion King T-shirt without feeling like you're dressed up? This route keeps things bold yet wearable as it conveys a clear statement and is simple to wear and style.

2.1 Creative Workdays And Smart-Casual Moments

• Tee + dark chinos + unstructured blazer + leather boots.
• Add a slim belt and a quiet watch. Done.
• You look ready, not fussy.

2.2 Weekends, Concerts, And Markets

• Tee + relaxed chinos or cargos + sneakers + crossbody bag.
• A light nylon jacket handles wind and late shows.
• Hands free, head clear.

3. Quick Fit Guide You Can Trust

Fit is the whole ballgame. A statement tee hits hardest when proportions land right. Aim for shoulder seams at the edge of your shoulders, sleeves brushing mid-bicep, and a hem near mid-fly so it layers cleanly. With LionKingShirt, treat fit like a tool—small tweaks change the read of the graphic, the line of the torso, and the feel in motion.

3.1 How To Pick Your Size

• Measure chest at fullest point, relaxed.
• Between sizes? Size up for drape; true-to-size for a neat line.
• Check length so it won't bunch when you move.

3.2 Tips For Different Builds

• Broad shoulders: go slightly longer to balance width.
• Taller frames: longline hem helps maintain proportions.
• Shorter frames: a slightly higher hem lengthens the leg.

4. Fabric And Print That Go The Distance

Comfort first, longevity close behind. Ringspun cotton feels smooth on day one and breaks in without getting scratchy. Print methods matter too: DTG or DTF deliver detail, crisp lines, and better wear over time. Fabric weight, stitch quality, and print durability keep the bold graphic reading cleanly after many washes—so the message stays sharp, not tired. Wear Your Passions with POD T-Shirt Designs from LionKingShirt.

4.1 What "Ringspun" Means In Plain English

Fibers are twisted tighter for a smoother hand and stronger yarn. Translation: fewer rough spots, better drape, dependable comfort. No fluff—just feel.

4.2 Print Durability Basics

• Wash cold, inside-out.
• Low heat or hang dry.
• Skip harsh bleach.

These small habits protect edges, preserve contrast, and extend the life of the graphic.

5. Three Outfit Formulas By Purpose

Clothes should help you move, not slow you down. Pick a lane, swap parts, and go. That's real-life styling—no second-guessing, no "nothing to wear" spiral. LionKingShirt: A Hot Spot for Fashion Enthusiasts who want clear rules, quick wins, and street-ready results.



Everyday cotton T-shirt that combines simplicity and comfort

5.1 Daily Driver (5 Minutes)

• Tee + straight jeans + white sneakers.
• Optional: denim overshirt for texture.
• Why it works: scale and contrast keep the print front and center.

5.2 Creative Smart-Casual (10 Minutes)

• Tee + dark chinos + unstructured blazer + Chelsea boots.
• Add a leather belt and a simple watch.
• Why it works: clean lines frame the message; you look composed.

5.3 Street Lean (Throw-on-and-go)

• Tee + cargo pants + high-tops + cap.
• Optional: light nylon jacket.
• Why it works: utility shapes add attitude; the tee still leads.

6. Care And Longevity Made Simple

Take care of the piece and it pays you back. Wash with like colors, inside-out, and keep heat low. If you iron, go gentle and cover the print with a cloth. Store it folded to avoid stress lines; hang it up as soon as you arrive. Quick habits, big payoff. Keep it simple, keep it sharp, and let Lion King Tee Shirts do the talking when it counts. Over time, that steady routine keeps the graphic clear and the fabric soft—no fuss, just miles.

[Bealman]

There's like a million brands of superglue! For example, the stuff I buy here in Australia probably isn't available anywhere else.

The brand is irrelevant really, as it's all made of the same nasty stuff. Just look for a tube that says superglue gel.

[martyn]

@beauharlan

As Bealman says, there are numerous brands available.

In the UK, branded makes include Bostik, Loctite, and B+Q own brand. There are many more, and can often be found in the hardware aisle in major supermarkets. In a model shop, I think Zap-a-gap do one, and Delux roket cyano is another. There are probably more.

Just make sure you get the gel version rather than the normal free flow one.

And, if sticking people, as PLD says, the biggest thing is patience and a steady hand.

Good luck.

Martyn

[Richard @ N'Tastic Scale Models]

If you use superglue, try the gel version; it is more tacky than the thin type when drying, giving a bit more grab whilst drying.

Martyn

Can you give me some product names? I'm interested in this gel.

I use Zap Gel PT-26 for all my superglue needs as it bonds all materials. It is sold on ebay and amazon either as jewellery glue, hobby glue or fly fishing glue. As I said a bit of moisture on one part helps and as others have said patience.