I am modelling on a DCC layout and looking to replicate the various lighting effects on the Network Rail NMT set.

Has anyone done this previously for DCC Layout?

Can you advise the basic elements involved and appropriate supplier or other sources.

Have tried various methods so far none compatible with DCC.

Thanks in advance for any assistance or advice from those who have succeeded.

Kind regards,

GE

What effects are you looking at replicating?

Dapol or Farish Mk3?

The Dapol Mk3 come with factory fitted electrical pick-ups and as easy to add lighting to. Both have space in the underframe for decoders and the necessary resistors.

There used to be a supplier of a PCB on eBay for this purpose, but they seem to have stopped. LEDs with appropriate resistors, and a bridge rectifier to handle to unusual DCC waveform.

IIRC they've got 4 on the pantograph. Pretty sure they still work now there's no pantograph fitted, then you've got the scanning light on the same coach as a line covering the track bed.

Quote from: njee20 on Yesterday at 09:13:20 AMThere used to be a supplier of a PCB on eBay for this purpose, but they seem to have stopped.

Hi Nig,

The light modules from Illuminated Models are still available.

The problem appears to be that they are not suitable for use on DCC.

The modules themselves work fine on DC but getting them to work on DCC is proving to be a problem!

I think that's really what Brian is trying to work out. We have them in 4mm and they work on DC, but even using a function decoder cannot get them to work with DCC.

Phil H

That's interesting. Can't get them to work as in they're not DCC-controllable or they don't work at all?

Quote from: njee20 on Yesterday at 05:44:55 PMThat's interesting. Can't get them to work as in they're not DCC-controllable or they don't work at all?

Hi Nig,

We can get them to work on DC.....

However, when tried to power on DCC - I get nothing at all.

My thoughts are that the output from the chip is too low.

I think the way the boards work means we need a constant 12v DC output from the chip.

Phil H

Quote from: Steven B on Yesterday at 08:43:09 AMWhat effects are you looking at replicating?

Dapol or Farish Mk3?

The Dapol Mk3 come with factory fitted electrical pick-ups and as easy to add lighting to. Both have space in the underframe for decoders and the necessary resistors.

The coaches are Farish and the locos are Dapol

GE

Instantly made harder with Farish coaches, as there are no pickups, so you'll have to install them somehow. Is switching to Dapol coaches an option?

Quote from: ScottishModeller on Yesterday at 07:20:52 PM

Quote from: njee20 on Yesterday at 05:44:55 PMThat's interesting. Can't get them to work as in they're not DCC-controllable or they don't work at all?

We can get them to work on DC.....

However, when tried to power on DCC - I get nothing at all.

My thoughts are that the output from the chip is too low.

I think the way the boards work means we need a constant 12v DC output from the chip.

Isn't that why you add a bridge rectifier? To convert the AC DCC signal to DC? Interesting though. They're the ones I was thinking of. I see they do the pantograph and the laser.

Bridge rectifiers are designed for mains frequencies, 50/60 Hz (cycles per second for the aged and infirm)
DCC is 8/10 kHz so the diodes cannot react fast enough to rectify the current.
Need to use signal diodes as they react fast enough.

Alan