N gauge oval

Started by micro_modeller, October 30, 2018, 03:24:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

micro_modeller

Hi with me being new to n gauge modelling and I like micro layouts. I am planning to build the smallest oval layout with one siding. I know I can use a wired straight and one point for the straight section but I always get confused with curves. If any kind forum member can help and explain what curves I will need and how many baring in mind I am going to use Peco code 80 track.
Happy Modelling

Kevin

ntpntpntp

How micro is micro?  What theme and what type of locos and stock are you considering?

Typical minimum radius for N is usually considered to be 9". Some larger locos can need something a bit more generous such as 11"-12".  You can go tighter than 9" with short locos and stock but it begins to look odd unless you're modelling something like a tram system.

When you go down toward the minimum radius then you can find flexi track starts to become tricky to work with, and using fixed Setrack pieces are easier to get a consistent curve.
Nick.   2021 celebrating the 25th anniversary of "Königshafen" exhibition layout!
https://www.ngaugeforum.co.uk/SMFN/index.php?topic=50050.0

Newportnobby

To be honest this is one for Peco set track, I think. Being a micro layout all your locos are likely to be small so won't have problems on radius 1 (9" radius) curves but might have stalling issues on a set track point. You will require 8 pieces of ST-12.

micro_modeller

Thanks for the advice. The locos I will be using are class 03 and 04 diesel shunters so quite small. The siding will be used for goods shunting. I always use set track code 80 but I am open to advice if there is another track I can use.
Happy Modelling

Kevin

port perran

You'll be fine with those shunters using 9inch radioys curves.
And the short set track points (ST 5 and 6) should be ok as long as you don't allow any crud to build up right by the plastic frog (otherwise those small shunters will stall at slow speed). If you keep that track and the loco wheels clean you should be ok.
What size is this layout going to be please?
I'm sure I'll get used to cream first soon.

Newportnobby

Quote from: micro_modeller on October 30, 2018, 03:46:26 PM
I always use set track code 80 but I am open to advice if there is another track I can use.

An alternative might be Kato Unitrack where you could possibly get away with their 8½" radius track with a #4 point and the required straights (see brochure attached). The track can be disguised to hide the plastic ballast shoulder and the points look expensive but contain pieces of straight track, have built in polarity switching and are easily motorised.

micro_modeller

If I'm needing 8 curves and a couple of straight I'm presuming my layout will be no longer than two and a half feet.
Happy Modelling

Kevin

AlexanderJesse

I have used traxeditor.com to quickly sketch the ovals using Peco set track and Kato. Both fit on a 600x500 mm (about 24x20 ") baseboard (although with minimal space on the outside...)

You can see the track-piece numbers in the image. Upper layout is Peco, lower is Kato
=================
have a disney day

Alexander

Remember: vapour is just water and therefor clean

Papyrus

Another alternative might be Minitrix radius 1 which is 20cm radius and is compatible with Peco, unlike Kato, and is still available.

I have half a circle and a LH point which are surplus to requirements. PM me if you are interested.

Cheers,

Chris

micro_modeller

Alexander that is the layout I am trying to explain and model. The best part is you have also put the track to use. :thankyousign:
Happy Modelling

Kevin

PostModN66

Why not use a Code 80 Streamline point with electrofrog to reduce the stalling issue?

The only consideration is that you would need to make up the length of the straight on the other side; Anyrail is on my other computer so I can't check whether a combination of small SetTrack straights make up the length of the smallest Streamline point.

Cheers

Jon  :)
"We must conduct research and then accept the results. If they don't stand up to experimentation, Buddha's own words must be rejected." ― Dalai Lama XIV

My Postmodern Image Layouts

Lofthole http://www.ngaugeforum.co.uk/SMFN/index.php?topic=14792.msg147178#msg147178

Deansmoor http://www.ngaugeforum.co.uk/SMFN/index.php?topic=14741.msg146381#msg146381

dannyboy

#11
I would agree with Mick, (newportnobby), in reply #5, apart from the fact that the points are motorised. If you do not use the Kato controller, which comes with a 12v DC output, all you neeed is a 12v DC supply and the Kato point switcher. If you want to PM me, I can let you have a point switcher for the cost of postage from Ireland - having said that, it might be cheaper to buy one!  :).  Have a look at Traintrax for Kato bits, he advertises on the forum - a nice bloke and quick posting.

http://www.traintrax.co.uk
David.
I used to be indecisive - now I'm not - I don't think.
If a friend seems distant, catch up with them.

AlexanderJesse

Quote from: PostModN66 on October 30, 2018, 07:40:51 PM
Why not use a Code 80 Streamline point with electrofrog to reduce the stalling issue?

The only consideration is that you would need to make up the length of the straight on the other side; Anyrail is on my other computer so I can't check whether a combination of small SetTrack straights make up the length of the smallest Streamline point.

Cheers

Jon  :)
The only to make that work is to use a piece of code-80 flextrack. with the Settrack pieces it is not possible to combine to the length of one of the two code-80-turnouts
=================
have a disney day

Alexander

Remember: vapour is just water and therefor clean

Railwaygun

Quote from: Newportnobby on October 30, 2018, 04:04:27 PM
Quote from: micro_modeller on October 30, 2018, 03:46:26 PM
I always use set track code 80 but I am open to advice if there is another track I can use.

An alternative might be Kato Unitrack where you could possibly get away with their 8½" radius track with a #4 point and the required straights (see brochure attached). The track can be disguised to hide the plastic ballast shoulder and the points look expensive but contain pieces of straight track, have built in polarity switching and are easily motorised.

All Kato points contain built in point motors, And very simple 2 wire / plug systems for solderless connections.

Starter sets of track/ PSU / points are readily available from Train TRax / Osbornes.

Unitrack info here:
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=7079.0
This has been a public service announcement
It may contain alternative facts

Caveat lector

The largest Railwaygun, Armoured Train & Military Rail group in the world!

https://groups.io/g/railwaygun/topics

NGF Military threads

https://www.ngaugeforum.co.uk/SMFN/index.php?board=146.0

My Military Rail Pinterest area
https://uk.pinterest.com/NDRobotnik/

10mm / N armour Threads
https://www.10mm-wargaming.com/

Motto: Semper ubi, sub ubi

Lawrence

Quote from: Papyrus on October 30, 2018, 05:40:24 PM
Another alternative might be Minitrix radius 1 which is 20cm radius and is compatible with Peco, unlike Kato, and is still available.

I have half a circle and a LH point which are surplus to requirements. PM me if you are interested.

Cheers,

Chris

Not entirely true Chris, you can always use the Kato 20-045 conversion track sections

Please Support Us!
October Goal: £100.00
Due Date: Oct 31
Total Receipts: £102.34
Above Goal: £2.34
Site Currency: GBP
102% 
October Donations