Hi all I'm looking to renumber a few manors and halls to a different running number, I was wondering if anyone had any recommendations of companies that do them. Thanks in advance

The ModelMaster range of nameplates are available through the NGS shop and are very good. I haven't done a tender loco with them yet but here is a Dapol 1400 I renumbered as 1470 using their plates. The etching is crisp and legible (no small accomplishment in N gauge ).

I bought some etched name plates from www.narrowplanet.co.uk on the recommendation from someone else on the forum (can't remember who).
Very good they are too. Very crisp and nicely background painted.
They do quite a wide range of standard shapes and sizes and I believe they do a custom service as well.

Shawplan are well known for their etched plates.....
http://www.shawplan.com

I would recommend shawplan too

Lytchett Manor models do steam plates only (including some Schools class)


http://www.lytchettmanor.co.uk/lytchett-manor/steam-plates

Fox transfers have a good range too!

Can anyone recommend the best glue to use?

I can highly recomend NARROW PLANET if you want bespoke nameplates they are very good BUT they do have to wait untill they have a full A3 sheet before they get them etched so you might have to wait a while untill you get your order.
If your lucky they might have a nearly full sheet because Midsummer end has put a fairly big order in recently.
Bob

Quote from: GWR-Kris on February 26, 2017, 12:53:09 PM
Can anyone recommend the best glue to use?

I like superglue gel. It holds strongly but takes several seconds to set allowing for a bit of repositioning.

Matt varnish works pretty well too and has the advantage that is any leaks around the edges of the plate, it does not dry shiny.

Thats how I put my nameplates on Karhedron I position the plate just before the varnish dries, and as you say if any does come from under the plate it wont show but helps to hold the plate on from careless fingers
Bob

Quote from: Karhedron on February 26, 2017, 04:49:10 PM

Quote from: GWR-Kris on February 26, 2017, 12:53:09 PM
Can anyone recommend the best glue to use?

I like superglue gel. It holds strongly but takes several seconds to set allowing for a bit of repositioning.

Matt varnish works pretty well too and has the advantage that is any leaks around the edges of the plate, it does not dry shiny.

Thanks for that. One of the nameplates from my D1038 Western Sovereign and I was trying to figure out the best way to reattach it!