I don't know the best place to post this, so, here goes...
I need to get around 20(ish) of these:

It is a small bolt (with associated nut/washer) which is used to mount a 'D'-sub connector.  The internal threading accepts the hold down screws from the 'D'-sub shell.

Question 1:  What is the correct name for these things? (hard to Google without knowing!)
Question 2:  Does anyone know where I can buy them at sensible prices?  (found them listed (wrongly) as socket screws on a site but they wanted £7.18 a pair for them!!!)
Question 3:  I did manage to stumble across them on one website but they had no name attached to them - just a part number.  The question is where can I get them in quantities that make sense. (I don't need a bag of 250!) I need around 20-24 of these items - 10-12 pairs.

Any assistance will get you an entry in my book of super heroes.

Regards, Allan.....

Quote from: Zogbert Splod on August 05, 2015, 05:10:41 PM
I don't know the best place to post this, so, here goes...
I need to get around 20(ish) of these:

It is a small bolt (with associated nut/washer) which is used to mount a 'D'-sub connector.  The internal threading accepts the hold down screws from the 'D'-sub shell.

Question 1:  What is the correct name for these things? (hard to Google without knowing!)
Question 2:  Does anyone know where I can buy them at sensible prices?  (found them listed (wrongly) as socket screws on a site but they wanted £7.18 a pair for them!!!)
Question 3:  I did manage to stumble across them on one website but they had no name attached to them - just a part number.  The question is where can I get them in quantities that make sense. (I don't need a bag of 250!) I need around 20-24 of these items - 10-12 pairs.

Any assistance will get you an entry in my book of super heroes.

Regards, Allan.....

Here's a possibility Allan. If it's not exactly want you want it may help you find what you want.
http://www.rapidonline.com/Cables-Connectors/Screwlock-Assemblies-63733

You mean female screwlocks, probably M3 ... ?
[url][/http://uk.rs-online.com/web/c/connectors/connector-tools-accessories/connector-screws-nuts/?searchTerm=screwlockurl]

Quote from: MikeDunn on August 05, 2015, 05:34:44 PM
You mean female screwlocks, probably M3 ... ?

You got your link a bit screwed up Mike (Xcuse pun)
Here it is unjumbled http://uk.rs-online.com/web/c/connectors/connector-tools-accessories/connector-screws-nuts/?searchTerm=screwlock

I'm sure I've got a bag of those... somewhere... 

These are on Ebay?

http://www.ebay.co.uk/itm/5-Pairs-of-Standard-D-SUB-Hood-8mm-Screw-Jack-Posts-with-Washers-and-Nuts-/391176931358?pt=LH_DefaultDomain_3&hash=item5b13f6481e

Got 'em on order!

Huge thanx to all who responded.  They are so easy to find once you know what they are called... 

I have now opened a second page in the Super Heroes book since there are so many of you.



Regards, Allan.....

Quote from: austinbob on August 05, 2015, 05:48:02 PM
You got your link a bit screwed up Mike (Xcuse pun)

Groan ... 

Cheers for that - the perils of quickly pasting when called down for tea !

Quote from: MikeDunn on August 05, 2015, 07:03:08 PM

Quote from: austinbob on August 05, 2015, 05:48:02 PM
You got your link a bit screwed up Mike (Xcuse pun)

Groan ... 

Cheers for that - the perils of quickly pasting when called down for tea !

Been there, done it and got the tea shirt as they say.

When I got the responses above to my question about 'thingie' bolts I became intrigued by the one which referred to RS.  (Radio Spares)
My experience with them in the past was always good but they only dealt with account holders and to get an account you had to accept a visit from a rep and supply references etc. etc...  What a difference now!  A quick look on the website showed me a stack of items I had been looking for and at good prices.  I finally placed my order at 6:30 last night.  Everything was in my hands before 11:00am today.
If you are looking for electrical bits, electronics or tools, don't hesitate to check them out...

Regards, Allan.....

Yeah, RS are decent ... I tend to use either them or Farnell ... between them, they almost always have what I'm after.

Quote from: MikeDunn on August 05, 2015, 07:03:08 PM

Quote from: austinbob on August 05, 2015, 05:48:02 PM
You got your link a bit screwed up Mike (Xcuse pun)

Groan ... 

Cheers for that - the perils of quickly pasting when called down for tea !

Well I hope tea was ok and you didn't get a pasting there as well 

George

Just a cautionary note Allan, if you are using Sony kit, their D type jack posts are a different thread to everyone else's jack posts. They use UNF, not metric threads. Found this out the hard way.

I'm not as it happens. But thanx.  That's so silly ain't it?
So, these things are about as standard as the dreaded RS232 then. That was only standard till HP and IBM produced their own versions of it...