Problem with Dapol Hymek...

Started by F2Andy, Today at 11:10:34 AM

Previous topic - Next topic

Tonk66 and 1 Guest are viewing this topic.

Add bookmark Print
Go Down Pages1
User actions

F2Andy

Today at 11:10:34 AM
I bought this only about a year ago, and it has developed a fault. It does not go unless you press down on the chassis over the bogie. Either bogie, but not in the middle.

My guess is this is an issue with the contacts between the bogie and the chassis? However, I cannot get the bogies off to check. Can anyone advise either on bogie removal, or what else it could be?

This is DC, but the model is designed for the next18 DCC chips.




Some of my 3d print designs can be found on Cults3d, and I blog about them here.

thebrighton

#1
Today at 12:36:53 PM
The bogies just pull off. Details do appear in the Dapol Hymek thread. Mentioned here in post 175: https://www.ngaugeforum.co.uk/SMFN/index.php?topic=278.165
Add bookmark Print
Go Up Pages1
User actions
Please Support Us!
February Goal: £100.00
Due Date: Feb 28
Total Receipts: £99.62
Below Goal: £0.38
Site Currency: GBP
100% 
February Donations