Stanier Suburbans from Dapol

[PLD]

Not sure how "loco in the middle" worked for the LMS system or if it was even possible.

It could be done but was rare.
As I understand it, change over from driving at one trailer to the other involved simply closing one valve and opening another. From what I've read elsewhere didn't the GWR system mean disconnecting one linkage and connecting the other??

[EtchedPixels]

Not sure how "loco in the middle" worked for the LMS system or if it was even possible.

It could be done but was rare.
As I understand it, change over from driving at one trailer to the other involved simply closing one valve and opening another. From what I've read elsewhere didn't the GWR system mean disconnecting one linkage and connecting the other??

I believe so.

Alan

[madchadbrad]

Any evidence that a "non-driving" BT might have been through fitted for push-pull?

Certainly none built motor fitted, and none listed in the known conversions.
I can't see there would be a need for non-driving brakes - The driving trailers were all brakes, and they weren't intended for routes with high demand for luggage space needing a second van in a two/coach train.

Thanks! I asked because I was thinking of expressing interest in an example of each coach type so: BT, 3rd, fitted comp, DBT. I could run them as a standard 4 coach loco fwd train and then discard the BT & 3rd if using them as a push pull set. For my locos that are suitable they would be BR lined maroon; I don't have any pre-nationalisation locos that would fit.

[madchadbrad]

I just tried to express my interest in some BR lined maroon versions but cannot get their system to register any number other than "0" for the DBT 2P-010-404. All the other ones I selected had a pull down menu for the quantity but not that one!
Anyone else had a problem?

[Hailstone]

Not sure how "loco in the middle" worked for the LMS system or if it was even possible.

It could be done but was rare.
As I understand it, change over from driving at one trailer to the other involved simply closing one valve and opening another. From what I've read elsewhere didn't the GWR system mean disconnecting one linkage and connecting the other??

I believe so.

Alan

the mechanical system employed by the GWR had one connection for each end and had to be connected/disconnected manually and only one end at a time - I did that as a fireman at Didcot railway centre back in the 80s

Regards,

Alex

[Stevie DC]

I just tried to express my interest in some BR lined maroon versions but cannot get their system to register any number other than "0" for the DBT 2P-010-404. All the other ones I selected had a pull down menu for the quantity but not that one!
Anyone else had a problem?

Hi, I've just tried this on my computer and didn't find any issue with the drop down menu. Could you try again please?

If you keep experiencing the same issue, let me know and I'll raise this with the marketing team to see if it is an occasional glitch.

Many thanks.

[madchadbrad]

I just tried to express my interest in some BR lined maroon versions but cannot get their system to register any number other than "0" for the DBT 2P-010-404. All the other ones I selected had a pull down menu for the quantity but not that one!
Anyone else had a problem?

Hi, I've just tried this on my computer and didn't find any issue with the drop down menu. Could you try again please?

If you keep experiencing the same issue, let me know and I'll raise this with the marketing team to see if it is an occasional glitch.

Many thanks.

I just tried again on my laptop, rather than my iPad, and it finally worked OK.
I had sent Dapol a message about it and they said it had been a problem on mobile phones and they thought had been fixed but they would check it again.
Maybe it had been fixed or maybe it was my iPad!
All sorted now anyway.

[Dalek]

It would be great if the system sent you an email with a list of items you selected.

Craig

[Stevie DC]

We've just posted our first update about this project on Facebook. We currently have just over half the number of expressions of interest we need to progress to the tooling phase.

https://www.facebook.com/photo?fbid=1276581994486005&set=a.454526186691594

Please remember that there is no obligation to buy at this stage. We are simply ascertaining if there is sufficient interest in these coaches to progress to the tooling and prototype stage.

[madchadbrad]

Latest update: over halfway to the target number of expressions of interest!
https://tinyurl.com/5x8twbhy

[Newportnobby]

At 65% there's still quite a way to go