Magnetic screwdrivers

[Old Black 5]

Hi,
I'm new to N gauge but fiddling with OO gauge screws and locations is bad enough! Can anyone recommend a suitable magnetic screwdriver?
Thanks

[ntpntpntp]

Get a decent set of jewellers screwdrivers (not the really cheap sets).   Personally I sometimes find magnetic screwdriver bits annoying, and anyway they don't work on brass screws and other non-ferrous.  I just use a tiny drop of pva on the tip, if necessary.

[Bealman]

Agree with all of the above, including finding magnetic screwdrivers mildly annoying.

And welcome to the NGF, by the way! 

[NinOz]

Hi,
I'm new to N gauge but fiddling with OO gauge screws and locations is bad enough! Can anyone recommend a suitable magnetic screwdriver?
Thanks

I make my own when needed.  Either magnetise the screw driver by stroking the metal shaft with a neodymium "super" magnet or by placing a small neodymium magnet on the metal shaft(near where the handle joins the shaft to keep it away from any bits it will stick to).

[joe cassidy]

I find a bit of spit on the end of the screwdriver will allow the screw to be picked up 9 times out of 10.

[Dorsetmike]

Tacky wax works for me, dip srewdriver tip in the wax, screws will hold wipe it off when done. Usually stocked in model  and craft shops as well as Amazon .

https://www.amazon.co.uk/Deluxe-Materials-AD29-Tacky-Adhesive/dp/B0047YOQHS/ref=sr_1_1?adgrpid=52737872043&gclid=EAIaIQobChMItuCQ67Hd5gIVWeDtCh3GFwgkEAAYASAAEgIqwvD_BwE&hvadid=259045689487&hvdev=c&hvlocphy=1006634&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=18331745643255959628&hvtargid=kwd-300993403561&hydadcr=27225_1822041&keywords=tacky+wax&qid=1577709487&sr=8-1

[Old Black 5]

Thanks to all who replied, very useful info.

[Malc]

I suppose waxy capacitors are few and far between these days, @Bealman ?

[east anglian]

I    used   a   trimmed   wooden    cocktail   stick   to   start   the   screw   then     a    small    screwdriver   to   finish   the     job,