N gauge Pug

[Jonny]

Does anybody know of any company that makes an n gauge pug

Could do with one for my layout I'm building

Thanks

Jon

[thebrighton]

Does anybody know of any company that makes an n gauge pug

Could do with one for my layout I'm building

Thanks

Jon

Greetings,
I'm affraid not. IIRC Dapol did consider making one but the wheelbase is shorter than the plastic frog on a Peco Insulfrog point so it just wouldn't work on many layouts.
Gareth

[Jonny]

Thanks Gareth

Yea I remember Dapol did try back many moons ago
Just wondered if anybody did one now with the use of electrafrogs

[zwilnik]

Does anybody know of any company that makes an n gauge pug

Could do with one for my layout I'm building

Thanks

Jon

Greetings,
I'm affraid not. IIRC Dapol did consider making one but the wheelbase is shorter than the plastic frog on a Peco Insulfrog point so it just wouldn't work on many layouts.
Gareth

Feasibly you could make it work if you used pick up whiskers (thin wire that gives extra pickup at the front or rear of the loco) or a match/shunters truck with pickups giving it extra power.

[Jonny]

Don't the 009 guys use an 0-4-0  chassis

[mokjumbo]

I`ve got a Peco kit built on an Arnold chassis and it runs pretty well with electrofrog points.They turn up very rarely now unfortunately.(Unless someone knows differently!)

[Jonny]

Mokjumbo is yours a N gauge or 009/narrow gauge??

Any pictures Please

Thanks

Jon

[AndyGif]

 I've got an Arnold köf II and you'd  be hard pressed to find a shorter wheelbase RTR loco.
Its never struggled with set track insulafrog points unless the blades are dirty .

[mokjumbo]

Mokjumbo is yours a N gauge or 009/narrow gauge??

Any pictures Please

Thanks

Jon

Hi Jon,it`s N gauge.I`ll see if I can get some pics in the next day or two.

[Stevie DC]

Not used this myself but try these guys for an alternative 0-4-0 chassis in n gauge: http://www.n-driveproductions.com/rangeandprices.htm

[EtchedPixels]

I did try it once - even did a test brass N gauge pug body, but the pug in N is truely tiny.

The wheels are 3ft on the L&Y ones and the wheelbase under 6'

So you'd need a chassis with 11mm wheelbase which N drive now do and you'd somehow have to get a motor in and get it running reliably and heavy enough. You'd probably have to use a micromotor and make the boiler the actual motor (a trick the 2mm folks do for some things).

It would be incredibly cool however.

[mokjumbo]

Mokjumbo is yours a N gauge or 009/narrow gauge??

Any pictures Please

Thanks

Jon

Hi Jon,it`s N gauge.I`ll see if I can get some pics in the next day or two.

Hi Jon,Ive taken a couple of pics (not great) I`ll see if I can post them!!!

[EtchedPixels]

Peco saddletank - way bigger than a pug.. Pugs are tiny - think loomed over by the terrier...