Third Rail Chairs - N Gauge 3D printed, pack of 100

Started by RBTKraisee, September 01, 2020, 04:55:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Add bookmark Print
Go Down Pages 1 2 3 4 5
User actions

Mark

#60
December 20, 2020, 11:50:19 AM
Please add me to the list of potential buyers - I'd order a few packs for my grubby little corner of south east London.

Mark

RailGooner

#61
December 20, 2020, 12:32:01 PM
i've been following this thread with passive interest - I'll never take up 3D printing myself but am very interested in other folks' adventures in 3D.

Now, I feel that I ought to commit to 1x pack each in white of flat bottom and sloping bottom. I have no idea, or even hazy dream of when I might use them, but I like to support this sort of initiative and they'll fill a corner of the stash drawer.

:beers:

RBTKraisee

#62
December 22, 2020, 09:55:19 PM
Quote from: Southerngooner on December 18, 2020, 11:46:37 AM
Hi Ken

I'm still waiting for a PM from Ross to say he is ready to produce them (post 1st December) and then we can go from there.

Dave

Work has been kicking my butt again. 100+ hour weeks since I got back on my feet. Today is the last day for this year though! Woo hoo!

My current plan is to take Wed/Thur/Fri off with SWMBO, to try to decompress a little, and then I'll take another look at these after Xmas.

Ross.
"The meek shall inherit the Earth. The rest of us are going to the stars" -Robert Heinlein
An Ex-Pat Brit:  Two decades living in Florida and still an unhealthy shade of "British Tourist White"

Steam Locomotive Wheel Dimensions: https://www.shorturl.at/xAEKW

All my available products are listed in the first post in my workbench thread.

Southerngooner

#63
December 23, 2020, 08:46:22 AM
Hi Ross,

There's no urgency for these so take your time!

Dave
Dave

Builder of "Brickmakers Lane" and member of "James Street" operating team.

Kenbj

#64
January 26, 2021, 08:42:47 PM
Hi
Would you be interested in just selling the Print file so that us in the uk could print our own?

Mark

#65
March 11, 2021, 10:22:51 AM

[/quote]

Work has been kicking my butt again. 100+ hour weeks since I got back on my feet. Today is the last day for this year though! Woo hoo!

My current plan is to take Wed/Thur/Fri off with SWMBO, to try to decompress a little, and then I'll take another look at these after Xmas.

Ross.
[/quote]


Hello Ross,

Appreciate you're very possibly still tied up with other things, but just wondered if there was any further progress with the chairs and if you had a rough idea when they might be available?

Thanks,

Mark

RBTKraisee

#66
March 12, 2021, 07:20:58 PM Last Edit: March 12, 2021, 07:42:43 PM by RBTKraisee
Quote from: Mark on March 11, 2021, 10:22:51 AM
Hello Ross,

Appreciate you're very possibly still tied up with other things, but just wondered if there was any further progress with the chairs and if you had a rough idea when they might be available?

Thanks,

Mark

Yeah, I got a prompt over on my RTS thread too and just noticed how long it has been since I was last on here.   Not good and apologies to all!

I'm going to see what I can do this weekend to get both these and the RTS into a state ready to start taking orders and shipping.

If you don't hear anything from me by the middle of next week, please *DO* bug me about it :)

Ross.
"The meek shall inherit the Earth. The rest of us are going to the stars" -Robert Heinlein
An Ex-Pat Brit:  Two decades living in Florida and still an unhealthy shade of "British Tourist White"

Steam Locomotive Wheel Dimensions: https://www.shorturl.at/xAEKW

All my available products are listed in the first post in my workbench thread.

Mr Sprue

#67
March 12, 2021, 07:49:13 PM
Quote from: Kenbj on January 26, 2021, 08:42:47 PM
Hi
Would you be interested in just selling the Print file so that us in the uk could print our own?

Wouldn't be hard to draw these up in CAD, if you want to go down this route its probably only about half hours work if that. 

I'm not going to do any research but if your want an STL file PM me details and dimensions of the chairs and I'll post the STL on here.

Hope that helps ease the frustration!

Dave

RBTKraisee

#68
October 06, 2021, 07:32:11 PM
These are finally going back into production this week, so I'll shortly be pinging everyone who has expressed interest and getting orders setup.

I was going to put them on Shapeways, but I've decided that I really don't like their business practices, so I'll be setting up my own online shop for these and some of my other wares.

Ross.
"The meek shall inherit the Earth. The rest of us are going to the stars" -Robert Heinlein
An Ex-Pat Brit:  Two decades living in Florida and still an unhealthy shade of "British Tourist White"

Steam Locomotive Wheel Dimensions: https://www.shorturl.at/xAEKW

All my available products are listed in the first post in my workbench thread.

RBTKraisee

#69
November 24, 2021, 03:54:14 AM
Now that most of my Gresley RTS kits have shipped and my printer is finally free to print other things again, these 3rd rail chairs are now back into production!

I'll ping everyone who has already expressed interest in these chairs by PM over the next few days.   If you want to add your interest please PM me!

If it's okay, I'd prefer to move discussion about the chairs over to my Workbench thread: https://www.ngaugeforum.co.uk/SMFN/index.php?topic=50131.0 just to keep everything in one place :)

Ross.




@LASteve has been installing some prototype parts on his Moorpark '21 layout:

"The meek shall inherit the Earth. The rest of us are going to the stars" -Robert Heinlein
An Ex-Pat Brit:  Two decades living in Florida and still an unhealthy shade of "British Tourist White"

Steam Locomotive Wheel Dimensions: https://www.shorturl.at/xAEKW

All my available products are listed in the first post in my workbench thread.

RBTKraisee

#70
December 10, 2021, 03:21:13 AM
Just a final note to anyone who has been following this thread and hasn't been watching my workbench thread, the 3rd Rail Chairs are now, finally, for sale!  :laugh3:

Sorry for such a long delay on these!

Please PM me if you are interested.

Further updates should be on my Wokbench thread please: https://www.ngaugeforum.co.uk/SMFN/index.php?topic=50131.0

Cheers,

Ross.
"The meek shall inherit the Earth. The rest of us are going to the stars" -Robert Heinlein
An Ex-Pat Brit:  Two decades living in Florida and still an unhealthy shade of "British Tourist White"

Steam Locomotive Wheel Dimensions: https://www.shorturl.at/xAEKW

All my available products are listed in the first post in my workbench thread.
Add bookmark Print
Go Up Pages 1 2 3 4 5
User actions
Please Support Us!
May Goal: £100.00
Due Date: May 31
Total Receipts: £12.34
Below Goal: £87.66
Site Currency: GBP
 12%
May Donations