Bridge compatible with Peco R1 and R2 curves

[ohlavache]

Hello.
Does anyone know model bridges compatible with the following curved tracks?
- Peco ST-12, R1 228mm
- Peco ST-15, R2 263.5mm
To clarify, I'm looking for a model that would be available for the two radii listed.
Thanks by advance for your help.
Bye.

[ohlavache]

No one has an idea?  :'(

[Jim Easterbrook]

The only curved bridge I've used is the Faller Landwasser viaduct which is 193 mm radius. Faller do some 225 mm radius segments (222543) but not a complete bridge, as far as I can see.
https://www.faller.de/gb/en/Products/Track-gauges/N-selection/Scenic-modelling/Slip-roads-exits-bridges/6-Track-beds-curved-sid15242.html

[Ali Smith]

I expect somebody knows, but they may have been at work this afternoon. It's not unusual for people to do this.

[zwilnik]

as the Ratio viaduct comes in sections, you could build it with each section joined at an angle and fill in the gaps at the back with more plasticard stonework.

[jpendle]

Hi,

Curved bridges are fairly unusual on the prototype. Railways tended to be built straight and flat!

One option would be to use a card model of a straight bridge, from Metcalfe or Scalescenes et al,  and bash it to make a curved bridge.

Regards,

John P

[ntpntpntp]

I did look around and came to the same conclusion as Jim, ie. the readily available Faller stuff doesn't match Peco radii.

Probably something best built yourself from scratch.

[Bealman]

Yes, I think a scratch build is probably the only option. As already noted, curved bridges on the prototype are fairly rare, and where they do exist, it's a gentle curve. (Landwassser excepted)