Vacuum pipe suppliers?

[chrism]

There was a suggested size in an article which I read which inspired me to do these; was it a G-string (!)? I've no idea after 40 years or so.

Careful, you'll have @Newportnobby and/or @Trainfish coming all over unnecessary again 

[Newportnobby]

There was a suggested size in an article which I read which inspired me to do these; was it a G-string (!)? I've no idea after 40 years or so.

Careful, you'll have @Newportnobby and/or @Trainfish coming all over unnecessary again 

Not me. After 40 years I'd never remember what a G-string is  

[Trainfish]

There was a suggested size in an article which I read which inspired me to do these; was it a G-string (!)? I've no idea after 40 years or so.

Careful, you'll have @Newportnobby and/or @Trainfish coming all over unnecessary again 

G-strings can be a pain in the arse.

So I'm told 

[RBTKraisee]

Thanks for all the replies so far. The Peco ones are not quite right for SR stock as @martyn has said, while that made by @JanW is lovely, but a bit time consuming! The lower one in @RBTKraisee  post is perfect, and will do both the KA and the Boosters. There must be others out there looking for these so maybe either @RBTKraisee or @njee20 could produce these  if we worked out what was needed? There are a few different types of course.....

Dave

These aren't worth trying to sell, so if there's demand (i.e. please let me know!) I could upload the designs to Thingiverse so anyone can print them.

Ross.

[Southerngooner]

Hi Ross

Good point, these aren't sellable.

If you are going to send some more N15 bits over then if you could include a dozen of the second vac pipe you showed in your earlier post then that would set me up for a while. I'd gladly pay for them, just let me know.

Dave