Text only | Text with Images

N Gauge Forum

General Category => General Discussion => Topic started by: swisstony on September 29, 2012, 07:11:57 PM

Title: Enamelled copper wire for lights
Post by: swisstony on September 29, 2012, 07:11:57 PM
Can someone recommend me a supplier or an eBay link, I ordered what I thought I needed from eBay and when it turned up it was thick enough to light my whole street in the real world!!!

Found this item on eBay 300774927981 but note sure of thickness

Cheers

Paul
Title: Re: Enamelled copper wire for lights
Post by: Sprintex on September 29, 2012, 07:26:28 PM
Just measured the stuff that came with my CR Signals at 0.25mm, so if you go for the 0.3mm you should be OK  ;)


Paul
Title: Re: Enamelled copper wire for lights
Post by: swisstony on September 29, 2012, 08:05:27 PM
 :NGaugeForum:

thanks mate.
Text only | Text with Images