Does this system have a rail joiner with elecric connection?
If not how is power connected to track?
M.
The easy way is with a 62 mm power feeder track: https://traintrax.co.uk/20041-62mm-feeder-track-p-281.html
The more complicated way is with powered "uni-joiners": https://traintrax.co.uk/24818-terminal-unijoiner-p-326.html
I think that the post is referring to a power input track. Yes, there is a small piece of track which accepts a plug from a Kato SX controller, as in the post above.
I use the 62mm power feed track piece for my Unitrack test oval, but it's powered by a Bachmann train set controller
Thanks for the replies.
The piece sitable is the powered rail joint=er as shown in the second link.
As some members, from whom I have asked for advice previously, may know I have had power connection problems in my stock yard due to using point blade contact.
Tha layout and stockyard splits in two halves with IRJs connecting the two, so I had a thought of using the Kato RJs as easy to disconnect/connect and applying power to all the loops by this means using switches.
They seem quite expensive though so I may try soldering wires to the standard Kato RJs which are less expensive.
Maurice C.