Hi all,
Just received my NGS order today and the little stove r is brilliant, cant say enough about how good this is. Also got the shark kit and a horsebox kit, having never done any kit building before i hope i can do it without stuffing it up. Any suggestions re kit building ive got open ears
how good is their service delivery very quick
I found the Shark to be a lovely little kit to build. One thing I didn't bother to do was to cut the peco chassis in half.
Here is a thread on mine:- http://www.ngaugeforum.co.uk/SMFN/index.php?topic=2669.0 (http://www.ngaugeforum.co.uk/SMFN/index.php?topic=2669.0)
I'd love to know where to get the decals that H used in his picture.
Quote from: 1936ace on April 11, 2012, 05:18:41 AM
Hi all,
Just received my NGS order today and the little stove r is brilliant, cant say enough about how good this is. Also got the shark kit and a horsebox kit, having never done any kit building before i hope i can do it without stuffing it up. Any suggestions re kit building ive got open ears
how good is their service delivery very quick
There was an article in an old NGS journal giving tips on constructing the horse box. Its raining heavily so I may have time to find it.
The Mark1 Horsebox is a lovely kit. There is one crawly horror with it. The chassis is plastic from bits glued together. You *must* get it absolutely square in all dimensions to get the horsebox to run properly. Spend time on that, have a flat surface to work on and a set square to check it all.
Alan
Quote from: Tank on April 11, 2012, 09:18:22 AM
I found the Shark to be a lovely little kit to build. One thing I didn't bother to do was to cut the peco chassis in half.
Here is a thread on mine:- http://www.ngaugeforum.co.uk/SMFN/index.php?topic=2669.0 (http://www.ngaugeforum.co.uk/SMFN/index.php?topic=2669.0)
I'd love to know where to get the decals that H used in his picture.
Hi
Modelmaster via the NGS sell a sheet of transfers for the Shark.
MMT066 NO'S ETC FOR 'SHARK' BRAKE VANS (2666)
MMT585 ENG'S DEPT 'SHARK','TOPE','TURBOT' (2865)
Cheers
Paul
Quote from: EtchedPixels on April 11, 2012, 01:38:57 PM
The Mark1 Horsebox is a lovely kit. There is one crawly horror with it. The chassis is plastic from bits glued together. You *must* get it absolutely square in all dimensions to get the horsebox to run properly. Spend time on that, have a flat surface to work on and a set square to check it all.
Alan
Hi
I cheated with mine and used W Irons from the 2mm SA along with their N Gauge wheels. I also converted it into this
http://www.departmentals.com/photo/321107 (http://www.departmentals.com/photo/321107)
Cheers
Paul
Thanks Paul. :thumbsup:
Anybody remember the original subject? it seems to have got lost! ???
thanks heaps i think i might take these to work and do them there where ive got no little distractors. luckily i kept all of my tools from my apprentice days. Do i just use normal glue like i use when building the plastic buildings or is there something speciual needed
Bart
Post deleted