Print Page - advice on these

Title: advice on these
Post by: guest311 on October 25, 2019, 05:30:06 PM

managed to cop some of these ..

https://www.ebay.co.uk/itm/Brengun-1-72-Step-Ladders-for-Hawker-Hunter-BAe-Harrier-2-72017/372429540678?epid=1047443959&hash=item56b687cd46:g:BfEAAOSw5dlZ-C-4 (https://www.ebay.co.uk/itm/Brengun-1-72-Step-Ladders-for-Hawker-Hunter-BAe-Harrier-2-72017/372429540678?epid=1047443959&hash=item56b687cd46:g:BfEAAOSw5dlZ-C-4)

idea is to have a couple of dispersals with a/c on them with the ladders on them, and a couple of ladders on the ground as either a/c closed down, or away.

so, for these etched items what is best ...

superglue or soldering ?

this may well feed on to the etched brute trolleys I have in the stash for Inverknockie mk.5

Title: Re: advice on these
Post by: ntpntpntp on October 25, 2019, 05:49:55 PM

Wrong scale for N?

If they're etched brass or nickel silver then I would solder (using solder paste) rather than superglue, but use whatever you prefer?

Title: Re: advice on these
Post by: guest311 on October 25, 2019, 06:00:22 PM

yeah, for 20mm wargames [ apologies for foul language ] brutes are for N.

many thanks for that, I'll sort out my iron, solder and paste and see how it goes .

N Gauge Forum

General Category => General Discussion => Topic started by: guest311 on October 25, 2019, 05:30:06 PM