This has probably been covered before many times, but can anyone recommend paints/techniques for representing LNER teak convincingly in N gauge? I've been experimenting, but so far without success. I live in Massachusetts, and can't get paint brands readily available in the UK--although there is some Humbrol to be had.
Hi Cutter.
I used a tan coloured Humbrol enamel on a matt white Vallejo acrylic undercoat.
The enamel dried with a nice streaky finish that resembles (to me) the grain of the teak.
Best regards,
Joe
I used Revel Aqua Color, wood brown 382. Diluted 50/50 in water and I applied several layers until I was happy wth the colour. I used a matt white spray as an undercoat.
I'm still in the process of tidying it up but here is my example so far...
(http://www.ngaugeforum.co.uk/SMFN/gallery/63/4601-300318151636.jpeg)
Rob.
Quote from: Jollybob on March 30, 2018, 03:24:23 PM
I used Revel Aqua Color, wood brown 382. Diluted 50/50 in water and I applied several layers until I was happy wth the colour. I used a matt white spray as an undercoat.
I'm still in the process of tidying it up but here is my example so far...
(http://www.ngaugeforum.co.uk/SMFN/gallery/63/4601-300318151636.jpeg)
Rob.
That looks very nice. LNER teak is my favourite 'livery' and I like the method you have come up with.
Cheers,
Chris
A simple method. Not perfect but good enough for me...
It's actually a little deeper in colour but the photo made it come out a little more pale.
The advantage of adding layers on is you can make some shades darker than others, Just like you would find on the real thing.
(http://www.ngaugeforum.co.uk/SMFN/gallery/63/4601-300318160015.jpeg)
This is the paint I use. Hope this is helpful.
Rob.