N Gauge Forum

General Category => General Discussion => Topic started by: Broken Neck on January 06, 2012, 02:34:30 PM

Title: Bogies help required
Post by: Broken Neck on January 06, 2012, 02:34:30 PM
Does anybody know of a supplier or manufacturer of Gloucester GPS Bogies Please?.
A while back ATM sold a brass etch overlay to convert there Y25's but these are now not available it was hoped that ATM where designing new Gloucester bogies but as yet nothing has appeared and I would like to finish my rake of Warwells.
Any help with this would be great.

Broken Neck
Title: Re: Bogies help required
Post by: red_death on January 06, 2012, 03:17:08 PM
I fear the answer is to be patient and wait for the ATM Gloucesters (though I am not sure if they are doing the GPS variant or not).  I tihnk the latest estimate is Feb or March.

Cheers, Mike
Title: Re: Bogies help required
Post by: Broken Neck on January 07, 2012, 01:37:39 PM
Mike, thanks for the update on ATM's expected date for it's Gloucester bogies. I do not have an inquiries  e-mail address for ATM. As you say I will just have to wait so they can run on some spare Y25c ones I have.

Barry
Title: Re: Bogies help required
Post by: Ben A on April 15, 2014, 09:41:44 PM

Hello Barry,

I just came across this thread by chance.  The ATM Gloucester bogies are out, and have been for some time now.

They can be sourced from Osbourne's models, N train and others including the NGS.

cheers

Ben A.
Title: Re: Bogies help required
Post by: NTrain on April 15, 2014, 09:58:59 PM
Afraid I have none at the moment.
Title: Re: Bogies help required
Post by: Broken Neck on April 16, 2014, 11:41:01 PM
Ben
Thanks very much for the update on the bogies. As NTrain are out of stock will look at the NGS and Osbourne's.
Barry
Title: Re: Bogies help required
Post by: NTrain on April 16, 2014, 11:59:35 PM
I have been told I should be getting some soon, so look again if you have no luck.
Title: Re: Bogies help required
Post by: NTrain on April 17, 2014, 10:53:10 PM
Just had confirmation that I should have some of the ATM bogies some time next week.