:help:Hi guys I am using a lenz lh 100 with a lenz dcc 23151 computer interface the base station is link to interface using a earthnet cable from laptop to interface I have downloaded the free touchcab app I am able to see it recognises my router and I get 4 reels of number up but unable to go any further why please.mike
Quote from: fatso on March 17, 2015, 04:05:25 PM
:help:Hi guys I am using a lenz lh 100 with a lenz dcc 23151 computer interface the base station is link to interface using a earthnet cable from laptop to interface I have downloaded the free touchcab app I am able to see it recognises my router and I get 4 reels of number up but unable to go any further why please.mike
Hi
That suggests that the TouchCab app and the lenz system can't see each other.
By default the Lenz interface is on IP address 192.168.0.200 and your router would need to be on the same address range in order for the system to work. So using a laptop go to the command line and type ipconfig which will list the IP address of the Laptop. Post the IP address and I can then tell you if you need to change the Lenz interface address.
Cheers
Paul
Hi my laptop IP ADDRESS IS192.168.1.71 using apple ipod touch ip Address is 192.168.1.68 also the router is independent from network hub hope this helps thank you.mike
Quote from: fatso on March 17, 2015, 04:59:52 PM
Hi my laptop IP ADDRESS IS192.168.1.71 using apple ipod touch ip Address is 192.168.1.68 also the router is independent from network hub hope this helps thank you.mike
Hi
There in lies the problem. The Lenz interface needs changing from its current default of 192.168.0.200 to for example 192.168.
1.200. Instructions on how to change it should be in the manual.
Cheers
Paul
Hi the I pod touch shows we are connected to router but soon as we change the reels to the interface ip address nothing the router ip address has been changed to the same as lenz the wifi box has a tick showing its connected but still unable to see throttle
Unless you have changed the Lenz interface IP address then the Lenz interface and router are not on the same network. As Paul said you need to change the Lenz interface to 192.168.1.200.
The fact you can access the wifi from your ipod touch only shows that the touch and router/wifi box are on the same network.
Mike
Quote from: red_death on March 17, 2015, 07:18:58 PM
Unless you have changed the Lenz interface IP address then the Lenz interface and router are not on the same network. As Paul said you need to change the Lenz interface to 192.168.1.200.
The fact you can access the wifi from your ipod touch only shows that the touch and router/wifi box are on the same network.
Mike
Ok so how do I change the lenz ip address look it up in pdf file but cant find the way its done.mike
Quote from: fatso on March 17, 2015, 07:55:41 PM
Quote from: red_death on March 17, 2015, 07:18:58 PM
Unless you have changed the Lenz interface IP address then the Lenz interface and router are not on the same network. As Paul said you need to change the Lenz interface to 192.168.1.200.
The fact you can access the wifi from your ipod touch only shows that the touch and router/wifi box are on the same network.
Mike
Ok so how do I change the lenz ip address look it up in pdf file but cant find the way its done.mike
Hi
Step by step guide here
http://www.touchcab.com/support/troubleshooting.html (http://www.touchcab.com/support/troubleshooting.html)
You can either choose to set it to DHCP where it will automatically get an address or you can type in 192.168.1.200 for a fixed address.
Cheers
Paul
Ok state of play have typed xpresnet into browser message cant display page typed the interface ip number into browser message cant display page so touchcab is not as easy as they say it is beware.mike
Mike
Touch cab is an app not a browser programme, isn't it?
What you are trying to do by accessing via a browser is get to the Lenz interface, which sounds as though you still have it running on a different network ie incorrect IP address.
Mike
Hi yes im still trying to change the ip of the lenz followed the instruction touchcab give nothing just as stated page cant be displayed same thing with ip number touchcab instruction not mine so if im doing everything by the book what have been missing.mike
Have you connected the lenz interface to your PC directly with an ethernet cable and changed your PC's ip address to be able to access the Lenz interface?
It doesn't sound as though you have. You can check the ip address of your PC (eg using ipconfig /all) - unless it is in the 192.168.0.x range then you won't connect to the Lenz interface.
Hi my laptop IP ADDRESS IS192.168.1.71 I have been to cmd but unsure how and what to change my ip address for laptop need a little help if you can please thank you .mike
Mike
Please re-read all the instructions you have been given on here as they contain all the reasons for the problems and solutions.
The basic problem is your router is creating a network using 192.168.1.x IP addresses, but the default IP address for the Lenz interface is 192.168.0.200 ie the two networks are incompatible.
The link that Paul gave you to the troubleshooting page on Touch Cab's website gives you instructions on how to configure your Lenz interface to the correct IP address. Follow those instructions - if you don't know how to do something then either Google it or ask a clear, specific question as at the moment it is very unclear to all of us reading this what your exact problems are.
If you don't know how to change your laptop's IP address then google it - there is loads of advice out there.
Mike
After all the agro the fault was with a cable not being wired correctly from lenz after changing the cable I now have connecting to xpressnet loading command station info fingers x I have done it many thanks to everyone who helped and support to get up and running .mike :thankyousign:
Managed to get this far changing ips etc.but still getting this message after 1 hour[smg id=23055 type=preview align=center caption="20150318 164642 resized"]
Quote from: fatso on March 18, 2015, 04:56:03 PM
Managed to get this far changing ips etc.but still getting this message after 1 hour[smg id=23055 type=preview align=center caption="20150318 164642 resized"]
Hi
That suggests its connecting to the command station but is failing to read from it for some reason. I would suggest posting on the TouchCab forum as Jens is very good at responding. You might also like to try a reset on the command station. If you have a LH100 handset I think you need to press the 4 key 25 times to do a factory reset.
http://www.touchcab.com/forum/ (http://www.touchcab.com/forum/)
Cheers
Paul
Hi guys now running trains using apple ipod touch 5gen and also using ipad2 with the free trial app for touchcab many thanks for your time and help on this mission.mike