Dapol / Miller project HST model due 2016

Started by Railwaygun, September 26, 2015, 10:26:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ohlavache

Apart Mk3 coaches and the Mk1 RKB buffet available as a kit, what can we put behind an HST prototype which could be available as RTR models in N gauge ?

The thing is that I love classes 41 and 43 locomotives. But I'm really not fond of Mk3 coaches.
Thanks.

Karhedron

One option is simply to run a pair back-to-back. This happened from time to time during testing.





or just a brake van for the guard? Hard to tell but looks like an ex-lms flavoured one.



Another idea is hauling test APT vehicles but that is not really an RTR option.





Alternatively, we will have to look at what the preserved power is/will be running with. So far it looks like mostly Mk3 stock although there are a few interesting alternatives.





Quote from: ScottyStitch on September 29, 2015, 11:28:46 AM
Well, that's just not good enough. Some fount of all knowledge you are!  :no:  ;)

Snowwolflair

I wonder if it will have sound, if so i'm getting ear plugs. 

I saw her at the Haymarket sidings in Edinburgh in the early 70's and she screamed the place down - ten times louder than the current HST units.

Definitely a memorable day. :claphappy:

Sprintex

Quote from: Snowwolflair on September 30, 2015, 02:16:03 PM
I wonder if it will have sound, if so i'm getting ear plugs. 

I saw her at the Haymarket sidings in Edinburgh in the early 70's and she screamed the place down - ten times louder than the current HST units.

Definitely a memorable day. :claphappy:

Still does 8)


http://youtu.be/f3umMl49XEg

About 08:15 in ;)


Paul

MikeDunn

What on earth were they throwing bags of spanners at in the intro minutes ?

And nice to see the VW emissions test being passed @ 3:28  :P

Adam1701D

I hope Dapol can also release this in the departmental "more yellow" version - a frequent sight all over the network in the late 70s and 80s.
Best Regards,
Adam Warr
Peterborough, UK

Railwaygun

Yet when I surveyed all that my hands had done and what I had toiled to achieve, everything was meaningless, a chasing after the wind;
Ecclesiastes 2:11

This has been a public service announcement
It may contain alternative facts

Caveat lector

The largest Railwaygun, Armoured Train & Military Rail group in the world!

https://groups.io/g/railwaygun/topics

NGF Military threads

https://www.ngaugeforum.co.uk/SMFN/index.php?board=146.0

My Military Rail Pinterest area
https://uk.pinterest.com/NDRobotnik/

10mm / N armour Threads
https://www.10mm-wargaming.com/

Motto: Semper ubi, sub ubi

Snowwolflair

Quote from: Only Me on September 30, 2015, 10:44:37 PM
@Sprintex

you know all about project miller matey, surely even for a preserved engine it couldn't be allowed to chuff down the line too many times sprewing that amount of clag out?  Or were they burning in the new cylinder linings ? :D

They were probably running it on their waste fish an chip oil. :D

railsquid

Judging by the omnipresent smokey fug floating around under the roof at Paddington until relatively recently, I always assumes HSTs were coal-fired. Was a bit bemused when I was there last year to be able to sit outside the cafe on Platform one without being asphyxiated.

JasonBz

#24
Quote from: Karhedron on September 30, 2015, 01:35:26 PM




Totally  OT but thanks for posting that pic :)

Its given me an idea or two for something ....Though nowt to do with HSTs or even N gauge!

Sprintex

Quote from: Only Me on September 30, 2015, 10:44:37 PM
@Sprintex

you know all about project miller matey, surely even for a preserved engine it couldn't be allowed to chuff down the line too many times sprewing that amount of clag out?  Or were they burning in the new cylinder linings ? :D

Engine hadn't been run in quite a while, and this was its first proper test run with load. As with most diesels you get oil build-up in the exhaust which has to burn off too :thumbsup:


Paul

Snowwolflair

Quote from: Sprintex on October 01, 2015, 08:37:22 PM
Quote from: Only Me on September 30, 2015, 10:44:37 PM
@Sprintex

you know all about project miller matey, surely even for a preserved engine it couldn't be allowed to chuff down the line too many times sprewing that amount of clag out?  Or were they burning in the new cylinder linings ? :D

Engine hadn't been run in quite a while, and this was its first proper test run with load. As with most diesels you get oil build-up in the exhaust which has to burn off too :thumbsup:


Paul


AH so that's what VWs defense lawyers are going to say  :D :claphappy:  8) :bounce:

acko22

You go away for 2 months and 3 models that really take your interest all come at once!!!

This is by no means my era, but rule 1 firmly comes into play, this will be amazing to see running, now what don't I buy so I can afford it??
Mechanical issues can be solved with a hammer and electrical problems can be solved with a screw driver. Beyond that it's verbal abuse which makes trains work!!

davidinyork

Quote from: robert shrives on September 27, 2015, 09:59:42 PM
The power car shown will do for these early runs but the scrapped power car 43001 got altered roof cantrail grills production type? 

http://www.wnxx.com/images/scrap/index.php?level=picture&id=4749

Looks like it might just have been partial replacement, presumably for lost or damaged originals.

Mustermark

Dear Dapol, Please, please, please, don't do this with the horrid custard dipped ends... That was a big mistake by Farish on the Blue Pullman. Please do it in its early yellow-around-the-window state!

http://www.marksmodelrailway.com
I'm a personality prototype... you can tell, can't you.

Please Support Us!
April Goal: £100.00
Due Date: Apr 30
Total Receipts: £30.23
Below Goal: £69.77
Site Currency: GBP
30% 
April Donations