Official NGF Wagon Tour Participant List and Rules - 2011

Started by Tank, January 28, 2011, 08:42:52 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Shiney Sheff

My turn soon then :thumbsup:

Best get the camera battery charged  :camera:

jonclox

Quote from: Shiney Sheff on April 19, 2011, 08:56:03 PM
My turn soon then :thumbsup:

Best get the camera battery charged  :camera:

Yup they will be with you next week Shiney just as soon as they have Eastered in the sunny souf with me  :thumbsup:....
I mean once my camera batteries have charged up and Ive taken some pictures
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

jonclox

Well tthey have arrived in the sunny souf thanks to Lawrence and Mr Postie  :thumbsup:
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

Tank


jonclox

#19
Quote from: Tank on April 25, 2011, 06:44:47 PM
Come on then, where are the pictures?!   ::) :smiley-laughing: :smiley-laughing:
:-[ :-[ um...... errrrr ..... the films still being developed  :(

('Onest guv.....now would I lie to you? )
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

jonclox

Quote from: Tank on April 25, 2011, 06:44:47 PM
Come on then, where are the pictures?!   ::) :smiley-laughing: :smiley-laughing:
Stop bullying me  ???
Not my best offerings but a bad back and breathing problems rather messed up photo sessions etc :(





The wagons choose not to like my code 80 track with its tight curves so I didn't get to enjoy running them much  :'( nice models tho.
Would try again this week but Shiney is waiting his turn
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

Tank

Very good pictures fella.  Sorry to hear they didn't like your curves. :thumbsdown:  I'm sure it won't matter if you kept them until the weekend. ;)  I like the different levels you have on the layout.

jonclox

Quote from: Tank on April 26, 2011, 11:12:31 AM
  I'm sure it won't matter if you kept them until the weekend. ;)  I like the different levels you have on the layout.
#1...... Ive PMd Shiney to say they will be posted today/tomorrow latest.
#2....the parcel is packed etc.
#3 hmph :-\ there must be a #3 surely
As a youngster when I had a good old Hornby 3 rail train set I was always trying to get it o go 'uphill' and over bridges but always failed to get a satisfactory outcome so now Ive started  (30/40 years later) in N gauge one of my 1st challenges was to get an extra level up above the rest of the layout.
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

Shiney Sheff

Wagons arrived in Sheffield yesterday all safe and sound  :NGFWagonTour:

Will have to get snapping and post some pics  :camera:

Bob

Shiney Sheff

Not good news I'm afraid chaps   :(

Just got them onto my track and it seems there is a problem with both wagons not wanting to go round any curves at all without falling off,so looks like it was not jonclox track that was at fault.

I will PM Tank to see if it's ok for me to effect a repair job as the bogies are quite stiff on their pivot points so as soon as they get to a curve they just want to go straight on.

Hopefully normal service will resume asap  :thumbsup:

Bob

jonclox

Quote from: Shiney Sheff on April 30, 2011, 04:53:50 PM
Not good news I'm afraid chaps   :(

Just got them onto my track and it seems there is a problem with both wagons not wanting to go round any curves at all without falling off,so looks like it was not jonclox track that was at fault.

I will PM Tank to see if it's ok for me to effect a repair job as the bogies are quite stiff on their pivot points so as soon as they get to a curve they just want to go straight


Well its good that they have arrived for you but not the rest of the post.
Yes they  did seem stiff to me but I thought it might have been the fact that they are so long and therefore not designed for tight curves.I ont think it was anything that  had done wrong but you ave me worried now :-[
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

Shiney Sheff

All repaired and in good working order, they now go round 1st radius curves  :thumbsup:

Just need to take some pics and get them posted tomorrow

Bob

Tank

Thanks Bob! :thumbsup:  I have to say that they never came off of my layout, but there weren't tight curves on it.  Good work though. :beers:

jonclox

Quote from: Shiney Sheff on May 01, 2011, 10:38:00 PM
All repaired and in good working order, they now go round 1st radius curves  :thumbsup:

Bob
Thanks Bob for fixing the problem and for the PM saying it wasn`t my fault. I felt really bad about it.  :thumbsup:
John A GOM personified
N Gauge can seriously damage your wealth.
Never force things. Just use a bigger hammer
Electronically and spelling dyslexic 
Ruleoneshire
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=17646.0
Re: Grainge & Hodder baseboards
http://www.ngaugeforum.co.uk/SMFN/index.php?topic=29659.0

Tank


Please Support Us!
November Goal: £100.00
Due Date: Nov 30
Total Receipts: £63.45
Below Goal: £36.55
Site Currency: GBP
63% 
November Donations