Has anyone managed to dismantle a Farish GUV - the current version, not the old "printed body" one?
I've just bought a green one (catalogue number 374-131A) and I'm not really seeing how to break into it. The underframe seems to be fantastically well-attached to the body and I cant work out how to separate the two. The roof appears immovable, too. Any advice about how to get the thing into pieces would be gratefully received.
Jim
Hello Jim,
The body is clipped on in the usual way. There is some flex in the chassis and I found the easiest way to get a blade or whatever (steel rule in my case) between the body and chassis was to carefully pull a buffer beam down and slot the blade in the gap exposed below the body side. I've just re-tried it as I write this. It does work!
Cheers
Clive
Question is why you need to break in to it?? It's not like there's any interior detail to add...
It's his truck. It's his perogative. Let him break into it if he wants to! :) :) :)
Perhaps he just wants to be nosey.
Cheers
Quote from: PLD on January 31, 2019, 07:42:47 AM
Question is why you need to break in to it?? It's not like there's any interior detail to add...
You would be surprised...
I am grateful for this thread as I intend to make use of the frame / bogies from a new tooling GUV for an upcoming project.
I would be amazed if Jim is doing the same as myself, but GUVs were / are useful beasts.
Skyline2uk
Quote from: PLD on January 31, 2019, 07:42:47 AM
Question is why you need to break in to it?? It's not like there's any interior detail to add...
Because I have A Cunning Plan...
Jim
Quote from: Jim Martin on January 31, 2019, 08:59:19 AM
Quote from: PLD on January 31, 2019, 07:42:47 AM
Question is why you need to break in to it?? It's not like there's any interior detail to add...
Because I have A Cunning Plan...
Jim
.....so cunning you could stick whiskers on it and call it a fox ;)
Quote from: Newportnobby on January 31, 2019, 01:42:23 PM
Quote from: Jim Martin on January 31, 2019, 08:59:19 AM
Quote from: PLD on January 31, 2019, 07:42:47 AM
Question is why you need to break in to it?? It's not like there's any interior detail to add...
Because I have A Cunning Plan...
Jim
.....so cunning you could stick whiskers on it and call it a fox ;)
Or put a tail on it and call it a weasel....
Slyline2uk
Quote from: Skyline2uk on January 31, 2019, 01:45:41 PM
Quote from: Newportnobby on January 31, 2019, 01:42:23 PM
Quote from: Jim Martin on January 31, 2019, 08:59:19 AM
Quote from: PLD on January 31, 2019, 07:42:47 AM
Question is why you need to break in to it?? It's not like there's any interior detail to add...
Because I have A Cunning Plan...
Jim
.....so cunning you could stick whiskers on it and call it a fox ;)
Or put a tail on it and call it a weasel....
Slyline2uk
It's not
that cunning. A brief look through my posting history would probably reveal the truth.
Jim
If it is anything like the Autocoach, it has 6 clips, 3 each side. Good fingernails and very thin plasticard to stop the blighters reclipping when you get them apart! Good luck.
Quote from: BR Signalman on January 31, 2019, 05:06:04 PM
If it is anything like the Autocoach, it has 6 clips, 3 each side. Good fingernails and very thin plasticard to stop the blighters reclipping when you get them apart! Good luck.
Checks fingernails...
Wonders how badly he needs this project
:laughabovepost: I managed eventually! Persevere Jim!