Recent posts #1
N Gauge Discussion / Re: Hunslet Shunter RTR or Scr...Last post by NScaleNotes - Today at 02:39:41 PMDon't have experience with building shunters but if this is a passion project and you're willing to learn there is no reason why you can use both materials.
3d print for the basic body shape and etched brass for the details that still look better as etched parts think very thin details like railings and window frames that either won't print or will be too delicate in 3d printed resin. You'll need to learn a CAD program to produce the 3D model and you'll need to learn a vector graphic program to produce your etches. You'll get a laundry list of packages if you ask which is the best so just experiment until you find one that suits you. You can start with open source i.e. FreeCAD and Inkscape for no cost but other commercial packages often have a free version that you can use. I never found a single, tell-all how-to, I've learnt techniques from various sources across the Internet as I went and had some useful experience from kit-building when younger but it's not been a quick process hence why I said passion project at the very beginning if you're just starting out. So, my advice would be start small and build on what you learn as you go. Maybe build a 3d model of something small, solid and relatively simple like an oil can that sits on the deck of the shunter for your first project or make an etch of the fence or gate in the yard that the shunter works in and build from that. If you start small, the mistakes and errors that inevitably occur won't set you back so much in terms of money and motivation or heck just jump right in, you'll know what works for you. #2
N Gauge Discussion / Re: Hunslet Shunter RTR or Scr...Last post by ntpntpntp - Today at 02:31:10 PMThese little battery shunting tractors are 3D prints drawn up by a friend, printed and decorated by me. They're not powered, they sit on old Farish loco front bogies (the ones with the undersize wheels) and even then the model had to be stretched a little to accommodate the bogie wheelbase.
Unpowered is arguably a better choice for these, they can couple to a loco (eg. overhead electric) and look like they're shunting around my loco depot away from the catenary Of course, no sooner had we produced these then Arnold have announced a working model which I have on pre-order! If you're going to create a working model make sure there is room to stuff it full of as much "liquid lead" shot as you can if you want it to pull anything #3
N Gauge Discussion / Re: Hunslet Shunter RTR or Scr...Last post by njee20 - Today at 01:51:11 PMPersonally for me I'd 3D print, brass strikes me as immeasurably harder, but I can use CAD software and have an array of printers, and can never remember which end of a soldering iron gets hot so I'm maybe not best placed to comment...
#4
General Discussion / MOVED: Hunslet Shunter RTR or ...Last post by Newportnobby - Today at 11:59:36 AMThis topic has been moved to N Gauge Discussion.
https://www.ngaugeforum.co.uk/SMFN/index.php?msg=832500 #5
N Gauge Discussion / Hunslet Shunter RTR or ScratchLast post by headstone - Today at 11:50:12 AMmaybe its me but as a new naive modeller
first it was (and continues to be) steam trams and now Ruston / Hunslet diesel shunter, ive bought a Tomytech chasis which is nearly the right size, brass or 3d for the body (if i can create a design) ? anyone out there had experience with creating a little shunter from scratch? Thankw Mark #6
General Discussion / Re: Unhappy ThreadLast post by Papyrus - Today at 11:02:09 AMQuote from: woodbury22uk on Yesterday at 05:29:48 PMYou can reduce the chance of that happening again by installing the Aurora App on a phone or tablet. I have been using it for a couple of years now and it has alerted me to possibilities of seeing Aurora Borealis several times and delayed me going to bed. Thanks! I've installed the app, and I got a notification to say that I can see it if I go to Iceland! (No, not the supermarket, before anyone suggests it...) It will be interesting to see what it comes up with. Cheers, Chris #7
General Discussion / Re: Unhappy ThreadLast post by Bealman - Today at 09:27:56 AMWow! Uber cool!
That is one thing I'd really like to see in what I've got left of me life, but it probably won't happen. There. I've just got us back to the unhappy thread. Whoops, I meant #8
General Discussion / Re: Unhappy ThreadLast post by Graham - Today at 09:18:05 AMQuote from: Bealman on Today at 08:53:40 AMWhen was that? Awesome pics!This was Saturday night near Gembrook, (end of the Puffing Billy line) where she lives. Just walked down the road and set up the tripod to take them. #9
General Discussion / Re: Unhappy ThreadLast post by crewearpley40 - Today at 09:05:42 AMQuote from: Bealman on Today at 09:02:41 AMChrisThanks that's what I meant I've never been good at science and have been following this Still looks beautiful #10
General Discussion / Re: Unhappy ThreadLast post by Bealman - Today at 09:02:41 AMChris
See from post#3213 down. | Please Support Us!
May Goal:
£100.00 Due Date: May 31 Total Receipts: £15.67 Below Goal: £84.33 Site Currency: GBP 16% May Donations |
Page created in 0.016 seconds with 20 queries.