Dapol (re)announce HST Protype train - open for pre-orders

Started by NGS-PO, September 08, 2018, 01:23:57 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

robert shrives

Hi
Yes there was an APT but 3rd Boxcar - on here as well- a while back noted that it was paused pending some health issues but much work had been done - certainly at one time on shapeways were pictures of two vehicles under test, power car chassis was the last bit being worked on after successfully doing the nose!
I am hopeful that it might come back.

There is a T gauge solid APT available - albeit you need to sort bogies and how to fit a motor bogie into a solid created body, but would be good for a wrap as a work desk feature!

Robert

woodbury22uk

#76
With a bit of searching I found the following:-

Power car chassis here:-

https://www.shapeways.com/product/38UB4FCSW/apt-m-underframe

Driving Trailer Second here:-

https://www.shapeways.com/product/RYY7A7V2C/apt-dts-body

Trailer Brake first here:-

https://www.shapeways.com/product/F8KXLFGTW/apt-tbf-body

Video of things moving here:-


https://youtu.be/1WywqbufRsE

Can't find the Motor car body.
Mike

Membre AFAN 0196

robert shrives

Yep ,
That is it , but no PC shown as this was pending chassis mods - a class 90 had been the first point but the good gents were working on a chassis where bits from a 90 would be fitted into it - as ever the tilt profile stopped the normal Farish block fitting.

A lot shown  from 2014 and DTS  from 2017 so a slow gentle progress, and as it is being made for own layout  I suspect it will be a while before a full set is made and possibly longer still - if ever for it to be a public affair so I would be gentle in contacting the designers as it may well disappear.

Back on topic - sorry for wavlets again!   The 252 will make for a great train and given until very recently it had a bit of main line movement I guess updating the 252 production model with orange line and HSE style warning notices a bit more Rule 1 fun can be had.
Robert       

Steven B

Rest assured that the 3d printed APT is still being worked on. As ever, real life gets in the way of modelling...

After much measuring and testing we have given up on the idea of using the Farish class 90. The motor was too big to fit within the restricted space of the ACT's power car. We looked at using a Farish DMU chassis. The 101, 108 or 150 chassis could just about squeeze (with a lot of work!) into the trailer first guard that sit either side of the power cars. After initial testing we felt two units would be needed and at over £200 isn't very cost effective.

Instead we've raided the American stock boxes of fellow Yorkshire Area Group members and identified parts from an Atlas diesel that according to our measurements should fit. The parts are reasonably easy to get hold of and not too expensive. A motorised chassis to fit within the M car is being worked on. We expect the new motor to have enough umph for a 14 car set but it remains to be seen what top speed it can manage.

A dummy power car will be made available once we've ironed out any changes needed.

Thanks for bearing with us on this project. Not being pestered during some tricky family times has welcomed.

Steven B
(partner in crime on the APT project)

woodbury22uk

Good news from Dapol - The HSDT prototype will be in the UK in 3-4 weeks time. Delivery of pre-orders should start right away.

Dapol have posted a couple of videos of more than complete sets being propelled round their test circuit at Chirk. A slow run by and a faster one to shake up the passengers.

Pleased I ordered this to go with my Revolution APT-E one day.

https://onedrive.live.com/?authkey=%21AKjjTF48T0emmnI&cid=9002AEF2FFA48391&id=9002AEF2FFA48391%21116644&parId=9002AEF2FFA48391%21979&o=OneUp


https://onedrive.live.com/?authkey=%21AIhHNtOJbk2du2M&cid=9002AEF2FFA48391&id=9002AEF2FFA48391%21116662&parId=9002AEF2FFA48391%21979&o=OneUp
Mike

Membre AFAN 0196

Bob G

Quote from: woodbury22uk on July 28, 2020, 05:59:19 PM
Good news from Dapol - The HSDT prototype will be in the UK in 3-4 weeks time. Delivery of pre-orders should start right away.

Dapol have posted a couple of videos of more than complete sets being propelled round their test circuit at Chirk. A slow run by and a faster one to shake up the passengers.

Pleased I ordered this to go with my Revolution APT-E one day.

https://onedrive.live.com/?authkey=%21AKjjTF48T0emmnI&cid=9002AEF2FFA48391&id=9002AEF2FFA48391%21116644&parId=9002AEF2FFA48391%21979&o=OneUp


https://onedrive.live.com/?authkey=%21AIhHNtOJbk2du2M&cid=9002AEF2FFA48391&id=9002AEF2FFA48391%21116662&parId=9002AEF2FFA48391%21979&o=OneUp

I've not been notified that my intent to purchase is now a pre-order. Have i missed something? I've not put any money down yet at all.
Bob


Snowwolflair

I put an order through 8th Sept 2018 but no cash was required.  I am really looking forward the this arriving, but not the invoice  :D

woodbury22uk

That's my mis-representation Bob G. My expression of interest was always a pre-order as far as I was concerned. I do not know how they will handle the transition from "intent to purchase" to an order. There was no commitment to purchase, although I have an order number.
Mike

Membre AFAN 0196

Bob G

I've already sold and am selling this week some "unnecessarily acquired" stock to fund this purchase. I copped the real one at Old Oak Common in May 1975 (alongside five Hymeks, and some Class A Tank Wagons no less).




The Hymeks were still working at this time, on parcels trains IIRC. My notes say they were (from left to right) 7018, 7093, 7017, 7028, 7011.

Those were the days.
Bob

njee20

Wow. I expected more fanfare with this reaching critical mass and what not. Not one for me, but that's exciting.

Kudos to Dapol for just plodding on in the background.

Bob G


Rabbitaway

Is that a class 21/29 black bodyshell I see in the background of the first clip, looks to long for a class 22, well may be wishful thinking!

Roy L S

Quote from: Rabbitaway on July 28, 2020, 07:13:59 PM
Is that a class 21/29 black bodyshell I see in the background of the first clip, looks to long for a class 22, well may be wishful thinking!


Hard to tell from that angle, but I would be really pleased if it is!

Roy

tutenkhamunsleeping

Quote from: Rabbitaway on July 28, 2020, 07:13:59 PM
Is that a class 21/29 black bodyshell I see in the background of the first clip, looks to long for a class 22, well may be wishful thinking!

It seems to have split head codes, so it's not a 21/29 :no:

njee20

Quote from: Bob G on July 28, 2020, 06:57:59 PM
Quote from: njee20 on July 28, 2020, 06:55:19 PM
Not one for me, but that's exciting.

Wot - not even with a twisted rule 1?

Haha! It's never really held much appeal actually. an APT on the other hand...

Please Support Us!
March Goal: £100.00
Due Date: Mar 31
Total Receipts: £82.34
Below Goal: £17.66
Site Currency: GBP
82% 
March Donations